Journal of Fashion Technology & Textile Engineering.ISSN: 2329-9568

All submissions of the EM system will be redirected to Online Manuscript Submission System. Authors are requested to submit articles directly to Online Manuscript Submission System of respective journal.

Research Article, J Fashion Technol Textile Eng Vol: 5 Issue: 2

Light Fastness Improvement of Dyed Acrylic Fibers Using UVAbsorbers

Claudia Udrescu, Franco Ferrero* and Gianluca Migliavacca

Department of Applied Science and Technology, Politecnico di Torino, Italy

*Corresponding Author : Franco Ferrero
Department of Applied Science and Technology, Politecnico di Torino, Corso Duca degli Abruzzi 24,10129 Turin, Italy
Tel: +39 0110904630
Fax: +39 0110904699
E-mail: [email protected]

Received: September 01, 2016 Accepted: May 03, 2017 Published: May 07, 2017

Citation: Udrescu C, Ferrero F, Migliavacca G (2017) Light Fastness Improvement of Dyed Acrylic Fibers Using UV-Absorbers. J Fashion Technol Textile Eng 5:2. doi: 10.4172/2329-9568.1000152


The use of UV-absorbers in the dyeing of polyester to improve lightfastness is well known. In analogous manner, in this study the effect of ultraviolet (UV) absorbers on light fastness of acrylic yarns dyed in conventional dyeing process has been investigated. Under optimised dyeing conditions, the samples were dyed with a selection of basic dyes. Consequently, the samples were post-treated with five types of UV-absorbers. Regarding the photo-fading, the postdyeing treatment was evaluated from the reflection spectra in terms of the L, a, b, color coordinates and by measuring the difference ΔE between untreated and treated samples. Samples were subjected to Xenotest and FTIR-ATR spectroscopy, while the morphological structure of the dyed fibres was investigated by scanning electron microscopy (SEM).

After the treatment, the acrylic fibres did not present any structural modifications and the specimens showed optimal values of light fastness.

Keywords: Acrylics; UV-absorbers; Light fastness

Track Your Manuscript

Recommended Conferences

World Congress on Polymers and Functional Materials

Auckland, New Zealand

13th World Congress on Recycling & E-waste Management

Dubai, United Arab Emirates

Share This Page