Journal of Business and Hotel Management2324-9129

Instructions for Authors

Journal of Business & Hotel Management (JBHM), provides the rapid monthly publication of articles in all areas of the subject. JBHM welcomes the submission of manuscripts that meet the general criteria of significance and scientific excellence. Papers will be published approximately one month after acceptance.
Submit manuscripts as an E-mail attachment to the Editorial Office at [email protected]
A manuscript number will be emailed to the corresponding author within 72 hours.
SciTechnol Policy Regarding the NIH Mandate
SciTechnol will support authors by posting the published version of articles by NIH grant-holders to PubMed Central immediately after publication.
Submission of an Article:
In order to reduce delays, authors should adhere to the level, length and format of the SciTechnol Journals at every stage of processing right from manuscript submission to each revision stage. Submitted articles should have a 300 words summary/abstract, separate from the main text. The summary should provide a brief account of the work by clearly stating the purpose of the study and the methodology adopted, highlighting major findings briefly. The text may contain a few short subheadings of no more than 40 characters each.

Formats for SciTechnol contributions: SciTechnol accepts various formats of literary works such as research articles, reviews, abstracts, addendums, announcements, article-commentaries, book reviews, rapid communications, letters to the editor, annual meeting abstracts, conference proceedings, calendars, case-reports, corrections, discussions, meeting-reports, news, obituaries, orations, product reviews, hypotheses and analyses.

Open Access:

In recent times, there has been a lot of debate on the implementation of Open Access for research publications. Realizing the potential of Open Access in terms of greater visibility within and beyond the scientific community, there has been a tremendous boost to Open Access movement through various Open Access publishers. Considering the importance of OA SciTechnol is offering open option to authors.

Open Option/Author pays model that operates alongside an established subscription model. Submission of an article remains free. If article accepted for publication, the author is given the choice to pay a fee to make their article open access.

Benefits:

Benefits of Open Access include greater visibility, accelerated citation, immediate access to the full text versions, higher impact and authors retain the copyright to their work. All open access articles are published under the terms of the Creative Commons Attribution (CC-BY) license. It also allows immediate deposit of the final published version in other repositories without restriction on re-use.

Article Processing Charges:

Publishing under Open Access mode involves a publication fee of US $519.

For Subscription articles the article processing charges (APCs) are:

Pages 1-10..................... US $60 per page
Pages 11 and above......US $75 per page

Note: All the published articles are in double-columned pages.

APC includes peer-reviewing, editing, publishing, archiving and other costs associated with publication of the articles.

If authors wish to retract their paper after rigorous review and revisions, he/she will be labelled to pay 10% of the total expenses on their article as a fee for processing. Since, the review process requires input of Editors, Reviewers, Associate Managing Editors, Editorial Assistants, Content Writers, Editorial Managing System & other online tracking systems to ensure that the published article is of good quality and is in its best possible form.

Individual waiver requests will be considered on a case-by-case basis and for authors from low-income countries.

Authors submitting from our parent OMICS Group member institutions have their APC covered in full or in part by their institutions. Find out more about our Open Access membership program.

Copy Rights:

Authors opted for subscription mode must sign copyright transfer agreement prior to publication of their article.

Publisher reserves the copyright and any extensions or renewals of that term there of throughout the world, including but not limited to publish, disseminate, transmit, store, translate, distribute, sell, republish and use the contribution and material contained therein in print and electronic form of the journal and in other derivative works, in all languages and any form of media of expression available now or in the future and to license or permit others to do so.

Article Preparation Guidelines

Manuscript title: The title should be limited to 25 words or less and should not contain abbreviations. The title should be a brief phrase describing the contents of the paper.

Author Information: Complete names and affiliation of all authors, including contact details of corresponding author (Telephone, Fax and E-mail address).

Abstract: The Abstract should be informative and completely self-explanatory, briefly present the topic, state the scope of the experiments, indicate significant data, and point out major findings and conclusions. The abstract should summarize the manuscript content in 300 words or less. Standard nomenclature should be used and abbreviations should be avoided. The preferable format should accommodate a description of the study background, methods, results and conclusion. Following the abstract, a list of keywords (3-10) and abbreviations should be included.
Text:

Introduction: The introduction should set the tone of the paper by providing a clear statement of the study, the relevant literature on the study subject, and the proposed approach or solution. The introduction should be general enough to attract a reader’s attention from a broad range of scientific disciplines.

Materials and Methods: This section should provide a complete overview of the design of the study. Detailed descriptions of materials or participants, comparisons, interventions and types of analysis should be mentioned. However, only new procedures should be described in detail; previously published procedures should be cited, and important modifications of published procedures should be mentioned briefly. Capitalize trade names and include the manufacturer's name and address.

Results: The Results section should provide complete details of the experiment that are required to support the conclusion of the study. The results should be written in the past tense when describing findings in the authors' experiments. Previously published findings should be written in the present tense. Results and Discussion may be combined or in a separate section. Speculation and detailed interpretation of data should not be included in the Results but should be put into the Discussion section.
Acknowledgement:
This section includes acknowledgment of people, grant details, funds, etc.
Note: If an author fails to submit his/her work as per the above instructions, they are pleased to maintain clear titles namely headings, subheading and respective subtitles.
References
Only published or accepted manuscripts should be included in the reference list. Meetings abstracts, conference talks, or papers that have been submitted but not yet accepted should not be cited. All personal communications should be supported by a letter from the relevant authors.
SciTechnol uses the numbered citation (citation-sequence) method. References are listed and numbered in the order that they appear in the text. In the text, citations should be indicated by the reference number in brackets. Multiple citations within a single set of brackets should be separated by commas. Where there are three or more sequential citations, they should be given as a range. Example: "... now enable biologists to simultaneously monitor the expression of thousands of genes in a single experiment [1, 5-7, 28]." Make sure the parts of the manuscript are in the correct order for the relevant journal before ordering the citations. Figure captions and tables should be at the end of the manuscript.
Authors are requested to provide at least one online link for each reference as following (preferably PubMed).
Because all references will be linked electronically as much as possible to the papers they cite, proper formatting of the references is crucial. Please use the following style for the reference list:
Examples:  
Published Papers
  1. Laemmli UK (1970) Cleavage of structural proteins during the assembly of the head of bacteriophage T4. Nature 227: 680-685.
  2. Brusic V, Rudy G, Honeyman G, Hammer J, Harrison L (1998) Prediction of MHC class II- binding peptides using an evolutionary algorithm and artifi cial neural network. Bioinformatics 14: 121-130.
  3. Doroshenko V, Airich L, Vitushkina M, Kolokolova A, Livshits V, et al. (2007) YddG from Escherichia coli promotes export of aromatic amino acids. FEMS Microbiol Lett 275: 312-318.
    Note: Please list the first five authors and then add "et al." if there are additional authors.
Electronic Journal Articles Entrez Programming Utilities
http://eutils.ncbi.nlm.nih.gov/entrez/query/static/eutils_help.html

Books
  1. Baggot JD (1999) Principles of drug disposition in domestic animals: The basis of Veterinary Clinical Pharmacology. (1st edn), W.B. Saunders company, Philadelphia,London, Toranto.
  2. Zhang Z (2006) Bioinformatics tools for differential analysis of proteomic expression profiling data from clinical samples. Taylor & Francis CRC Press.
Conferences
Hofmann T (1999) The Cluster-Abstraction Model: unsupervised learning of topic hierarchies from text data. Proceedings of the International Joint Conference on Artificial Intelligence.
Tables:

These should be used at a minimum and designed as simple as possible. We strongly encourage authors to submit tables as .doc format. Tables are to be typed double-spaced throughout, including headings and footnotes. Each table should be on a separate page, numbered consecutively in Arabic numerals and supplied with a heading and a legend. Tables should be self-explanatory without reference to the text. Preferably, the details of the methods used in the experiments should be described in the legend instead of in the text. The same data should not be presented in both table and graph form or repeated in the text. Cells can be copied from an Excel spreadsheet and pasted into a word document, but Excel files should not be embedded as objects.

Note: If the submission is in PDF format, the author is requested to retain the same in .doc format in order to aid in completion of process successfully.

Figures:
The preferred file formats for photographic images are .doc, TIFF and JPEG. If you have created images with separate components on different layers, please send us the Photoshop files.
All images MUST be at or above intended display size, with the following image resolutions: Line Art 800 dpi, Combination (Line Art + Halftone) 600 dpi, Halftone 300 dpi. See the Image quality specifications chart for details. Image files also must be cropped as close to the actual image as possible.
Use Arabic numerals to designate figures and upper case letters for their parts (Figure 1). Begin each legend with a title and include sufficient description so that the figure is understandable without reading the text of the manuscript. Information given in legends should not be repeated in the text.
Figure legends should be typed in numerical order on a separate sheet
Tables and Equations as Graphics
If equations cannot be encoded in MathML, submit them in TIFF or EPS format as discrete files (i.e., a file containing only the data for one equation). Only when tables cannot be encoded as XML/SGML they can be submitted as graphics. If this method is used, it is critical that the font size in all equations and tables is consistent and legible throughout all submissions.
Supplementary Information
Discrete items of the Supplementary Information (for example, figures, tables) referred to at an appropriate point in the main text of the paper.
Summary diagram/figure included as part of the Supplementary Information (optional).
All Supplementary Information is supplied as a single PDF file, where possible. File size within the permitted limits for Supplementary Information. Images should be a maximum size of 640 x 480 pixels (9 x 6.8 inches at 72 pixels per inch).
Proofs and Reprints:
Electronic proofs will be sent as an E-mail attachment to the corresponding author as a PDF file. Page proofs are considered to be the final version of the manuscript. With the exception of typographical or minor clerical errors, no changes will be made in the manuscript at the proof stage. Authors will have free electronic access to the full text (HTML, PDF and XML) of the article.

Track Your Manuscript

Share This Page